This is an schematics draw of the transferline with we are working:
From the right hand comes the linac's electron beam. First of all two little (green) corrector magnets, followed by three (blue) quadrupoles. Then diagnostics devices, the Monitor and the Fluorescent Screen Beam Position/ Optical Transition Radiation with the ccd camera with I am working for the emittance measurement.
Then the (red) bending magnet who bends a little the beam to continue in the transferline, or bend it more to guide the beam to the diagnostics section. Under an straight line from the linac, after the bending magnet some synchrotron radiation appears and another ccd will take photos from this Synchrotron radiation monitor.
Following what we want to use now, in the diagnostics line that goes horizontally from the bending magnet, another (blue) quadrupole can be saw and the beam will kick another FS/OTR where we will calculate the energy of the electron beam and its energy spread. And if the screen is open, the beam will die in a Faraday cup at the end of the diagnostics line and the signal of this cup will be saw in an osciloscope.
No comments:
Post a Comment